Learn How to Optimize Your Hercules DJ Controller with Virtual DJ Hercules Mapper 2.1
Rotronic USB to Serial Parallel Driver: How to Install and Use It
If you have a Rotronic device that uses a USB to serial parallel port, such as a humidity or temperature sensor, you might need to install the Rotronic USB to Serial Parallel Driver on your computer. This driver is the software that helps your operating system to communicate with your Rotronic device and access its data and functions.
rotronicusbtoserialparalleldriver
In this article, we will explain what the Rotronic USB to Serial Parallel Driver is, where to download it, how to install it, and how to use it. We will also provide some tips and troubleshooting steps in case you encounter any issues with the driver.
What is the Rotronic USB to Serial Parallel Driver?
The Rotronic USB to Serial Parallel Driver is a software tool that allows you to connect your Rotronic device that uses a USB to serial parallel port to your computer. A USB to serial parallel port is a type of port that converts a USB signal into a serial or parallel signal, which can be used by some devices that require a serial or parallel communication protocol.
Some of the Rotronic devices that use a USB to serial parallel port are:
HygroClip2 probes
HygroPalm handheld instruments
HygroFlex transmitters
HygroLog data loggers
HygroGen calibration generators
The Rotronic USB to Serial Parallel Driver allows you to access the data and functions of these devices on your computer, such as:
Reading and displaying humidity and temperature values
Configuring and calibrating the devices
Logging and exporting data
Updating firmware
Performing diagnostics and tests
Where to download the Rotronic USB to Serial Parallel Driver?
To download the Rotronic USB to Serial Parallel Driver on your computer, you need to follow these steps:
Go to this link.
Scroll down to the section "USB Driver".
Click on the link "USB Driver".
A zip file will be downloaded on your computer.
Extract the zip file and save it in a location of your choice.
How to install the Rotronic USB to Serial Parallel Driver?
To install the Rotronic USB to Serial Parallel Driver on your computer, you need to follow these steps:
Connect your Rotronic device that uses a USB to serial parallel port to your computer using a USB cable.
If you have not downloaded the driver yet, follow the steps in the previous section.
If you have downloaded the driver, go to the location where you saved it.
Double-click on the file "setup.exe".
A window will open where you can see the installation wizard.
Follow the instructions on the screen and click on "Next" until you reach the end of the installation process.
Click on "Finish" when the installation is complete.
You may need to restart your computer for the changes to take effect.
How to use the Rotronic USB to Serial Parallel Driver?
To use the Rotronic USB to Serial Parallel Driver on your computer, you need to follow these steps:
Make sure that your Rotronic device that uses a USB to serial parallel port is connected to your computer using a USB cable.
If you have not installed the driver yet, follow the steps in the previous section.
If you have installed the driver, go to the location where you saved it.
Double-click on the file "Rotronic.exe".
A window will open where you can see the main interface of the driver.
You can see a list of available devices on the left side of the window.
Select your device from the list and click on "Connect".
You can see the data and functions of your device on the right side of the window.
You can use different tabs and buttons to access different features, such as:
Data: To read and display humidity and temperature values.
Config: To configure and calibrate your device.
Data Logger: To log and export data.
Firmware: To update firmware.
Diagnostics: To perform diagnostics and tests.
Tips and troubleshooting steps for using the Rotronic USB to Serial Parallel Driver
If you encounter any issues with using the Rotronic USB to Serial Parallel Driver on your computer, you can try some of these tips and troubleshooting steps:
Make sure that your Rotronic device that uses a USB to serial parallel port is connected properly to your computer using a USB cable.
Make sure that you have downloaded and installed the latest version of the driver from this link.
Make sure that you have selected the correct device from the list of available devices in the driver interface.
Make sure that you have clicked on "Connect" after selecting your device in the driver interface.
If you still have problems with connecting or communicating with your device, you can try changing the COM port number in the driver interface. To do this, go to Settings > COM Port > Select a different COM port number from 1-9 > Click on OK > Click on Connect again.
If you still have problems with connecting or communicating with your device, you can try uninstalling and reinstalling
If you still have problems with connecting or communicating with your device, you can try contacting Rotronic support at sales@rotronic-usa.com or +1 631 427-3898.
Conclusion
In this article, we have explained what the Rotronic USB to Serial Parallel Driver is, where to download it, how to install it, and how to use it. We have also provided some tips and troubleshooting steps in case you encounter any issues with the driver.
The Rotronic USB to Serial Parallel Driver is a useful tool that allows you to connect your Rotronic device that uses a USB to serial parallel port to your computer and access its data and functions. It is compatible with Windows 7, Windows 8.1 and Windows 10 operating systems.
If you are interested in learning more about Rotronic devices and their features, you can visit their official website here. You can also find more information about humidity and temperature measurement and calibration on their blog here.
Thank you for reading this article and we hope that it has helped you understand how to use the Rotronic USB to Serial Parallel Driver.
What are some of the Rotronic devices that use a USB to serial parallel port?
As we mentioned before, some of the Rotronic devices that use a USB to serial parallel port are humidity and temperature sensors, such as the HygroClip2 probes, the HygroPalm handheld instruments, the HygroFlex transmitters, the HygroLog data loggers, and the HygroGen calibration generators.
These devices are designed to measure and monitor humidity and temperature in various applications and environments, such as:
Industrial processes and manufacturing
Pharmaceutical and biotechnology
Food and beverage
Museums and archives
Hospitals and laboratories
Agriculture and horticulture
Meteorology and climatology
And more
These devices offer high accuracy, reliability, and stability, thanks to the Rotronic sensor element and the Airchip3000 technology. They also offer various features and functions, such as:
Digital and analog outputs
Alarm and control functions
Data logging and analysis
Calibration and adjustment
Firmware updates
Diagnostics and tests
To access these features and functions on your computer, you need to install and use the Rotronic USB to Serial Parallel Driver.
How to use Rotronic devices with other software or systems?
If you want to use your Rotronic device that uses a USB to serial parallel port with other software or systems, such as LabView, Excel, Python, or Raspberry Pi, you need to follow some additional steps.
First, you need to download and install the Rotronic DLL from this link. The Rotronic DLL is a library that provides a link between Rotronic devices and your software program or system. The Rotronic DLL allows you to call up all functions within our devices that are accessible via our software.
Second, you need to integrate the Rotronic DLL into your software program or system. We have several example packages to make developing your own systems easier, including C++, Visual Basic, LabView, Excel, Python, Raspberry Pi, etc. You can download these example packages from this link.
Third, you need to write your own code or script to communicate with your Rotronic device using the Rotronic DLL. You can use different commands and variables that are explained in this manual. You can also use different modifiers, conditions, operators, functions, events, and feedbacks to control and monitor your device.
By using the Rotronic DLL, you can integrate your Rotronic device that uses a USB to serial parallel port into your own software program or system without losing any accuracy or functionality.
Conclusion
In this article, we have explained what the Rotronic USB to Serial Parallel Driver is, where to download it, how to install it, and how to use it. We have also provided some tips and troubleshooting steps in case you encounter any issues with the driver.
The Rotronic USB to Serial Parallel Driver is a useful tool that allows you to connect your Rotronic device that uses a USB to serial parallel port to your computer and access its data and functions. It is compatible with Windows 7, Windows 8.1 and Windows 10 operating systems.
If you are interested in learning more about Rotronic devices and their features, you can visit their official website here. You can also find more information about humidity and temperature measurement and calibration on their blog here.
Thank you for reading this article and we hope that it has helped you understand how to use the Rotronic USB to Serial Parallel Driver. ca3e7ad8fd